If the ribbon breaks, connect the two ends of the ribbon using a general purpose clear tape and continue using it.

The reasons for a broken ribbon are listed below.
– Check the size and the surface condition of the cards. If you use a defective card, the ribbon may break.
– Check the printer density (Total YMC, Black and Overlay). If the density is set too high, the ribbon may break. In this case, adjust the density using the CardPrinterSetup (refer to the printer user manual).
– Check the print position. If there is a problem with the print position, (the print start position or end position is incorrect), it may cause the ribbon to break.
You need to adjust the printing position using the CardPrintingSetup (refer to the Card Printer User Manual).

Recommended Posts

No comment yet, add your voice below!

Add a Comment

Your email address will not be published.